Optical zoom
Digital zoom
Zoom bar
White:
The optical zoom area
Yellow:
The digital zoom area
ESP/[!]
Changing
the area
for
measuring
the
brightness
of
a
subject
ESP Meters the brightness at the center
of
the monitor and the surrounding area
separately to capture
an
image with balanced brightness. When taking
pictures against strong backlight, the center of the picture may appear dark.
o Only the center of the monitor is metered. Recommended for taking a picture
against strong backlight.
AF MODE Changing
the
focusing
area
FACE
DETECT
iESP
SPOT
The camera searches a face within the frame and focus
on
it.
The camera determines which subject within the screen to focus on. Even
when the subject is not
in
the center of the screen, focusing is possible.
Focus selection is based
on
the subject within the AF target mark.
• Even when [FACE DETECT]
is
set, faces may not be detected depending on the subject.
• When [FACE DETECT] or [iESP] is selected, AF target mark is not displayed
in
shooting
standby.
~
Recording
sound
with
still
pictures
OFF
ION
When activated [ON], the camera will record about 4 seconds of audio
after the picture is taken.
When recording, aim the camera microphone at the source ofthe sound
you want to record.
When holding the camera, keep your fingers away from the microphone.
OFF
ION
This function allows you to mute operational sounds during shooting and playback
(e.g. warning beeps, shutter sounds, etc...
).
EN
29
To Next Page
Loading...
