EasyManua.ls Logo

Olympus Stylus 1030 SW - Appendix and Specifications; Camera Care and Safety

Olympus Stylus 1030 SW
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
Camera care
ICleaning the camera
Exterior:
o Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth
in
mild soapy water
and
wring well.
Wipe the camera with
the
damp cloth
and
then dry it with a dry cloth. If you have used the camera at the
beach,
use
a cloth soaked
in
clean water
and
wrung well.
o If any dirt, dust, sand, or other foreign material adheres to the periphery of the lens cover after use, or the
lens cover does not move smoothly, wash the camera using the method described
on
P.
65.
Monitor:
o Wipe gently with a soft cloth.
Lens:
o Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner.
Battery/Charger:
o Wipe gently with a soft, dry cloth.
U Note
o
Do
not
use strong solvents such
as
benzene
or
alcohol,
or
chemically treated cloth.
o Mold
may
form on the lens surface
if
the lens is left dirty.
Storage
o When storing the camera for extended periods, remove the battery,
AC
adapter
and
card, and keep
in
a
cool, dry place that
is
well ventilated.
o Periodically insert the battery
and
test the camera functions.
UNote
o Avoid leaving the camera in places where chemical products are handled since this
may
result
in corrosion.
Battery and charger
.
~
"0
c:
Q)
a.
a.
«
62
EN
This camera uses
one
Olympus lithium ion battery (L1-50B). No other type
of
batteries can be
used.
Power
consumption by the camera varies depending on which functions are used.
During the conditions described below, power is consumed continuously and the battery becomes
exhausted quickly.
o The zoom is used repeatedly.
o The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus.
o A picture is displayed on the monitor for an extended period
of
time.
o The camera is connected to a computer
or
printer.
Using an exhausted battery
may
cause the camera to turn
off
without displaying the battery level
warning.
The rechargeable battery is not fully charged
at
the time
of
purchase. Charge the battery fully with
the L1-50C charger before use.
The provided rechargeable battery usually takes approximately 2 hours to charge (varies on
usage).
The
supplied L1-50C battery charger is used only
for
L1-50B battery.
Do
not
charge other type
of
battery with the supplied battery charger. It might cause explosion, leaking, overheating
or
fire.
For plug-in type battery charger:
This power unit is intended to be correctly orientated in a vertical or floor mount position.

Related product manuals