Operating, shutting off and checking the alarm
o Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
o Shutting off the alarm:
While the alarm
is
sounding, press any button to shut off the alarm and turn off the camera.
Note that pressing
POWER
will turn the camera on.
When [SNOOZE] is [OFF], the alarm stops automatically and the camera turns off after 1
minute
of
no operation.
o Checking the alarm settings:
While the camera is off, press
DI5P.l./·~
to display the current and alarm set times. Times
will be displayed for
3 seconds.
VIDEO OUT Playing back pictures
on
a TV
NTSC
/
PAL
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV's video signal
type.
o
TV
video signal types differ by country/region. Check the video signal type before connecting
the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the
TV
before connecting.
Connector cover
Settings on the camera
Press
POWER
in
playback mode to turn the
camera on.
o The last picture taken is displayed on the
TV. Use the arrow pad to select the
picture you want to display.
Connectto the TV's video
input (yellow) and audio
input (white) terminals.
AV cable (provided)
Settings on the
TV
Turn the
TV
on, and set it to video input
mode.
o For details of switching to video input,
refer to your TV's instruction manual.
o Images and the information displayed on
the screen may become cropped
depending on the TV's settings.
To Next Page
Loading...
