Functions
that
cannot be selected
from
menus/Functions
that
cannot
be
selected even
by
pressing the
function
buttons
• Some items are not be selectable from the menus when using the arrow pad.
(The menu items displayed
in
gray cannot be selected.)
• Items that cannot be set with the current shooting mode
• Items that cannot be set because
of
an
item that has already been set:
When [DRIVE] is set to [H;i]. [FINE ZOOM] or [DIGITAL ZOOM] cannot be set.
• Some functions cannot be set by pressing the function buttons depending
on
the camera
setting.
[sl],
Flash Mode, etc.
• Some functions cannot be used when there is no card
in
the camera.
[PANORAMA], [PRINT ORDER], [FORMAT]. [BACKUP]
• You cannot change the function settings when the mode dial is set to GUIDE.
Restoring default settings
• This camera retains the settings (except for
SCN)
even after the power is turned off. To
return the settings to default settings, execute [RESET].
~
"RESET Restoring default settings" (P. 24)
IConfirming the exposure when the
monitor
is
difficult
to
see
outdoors
The monitor may be difficult to see and the exposure difficult to confirm when shooting
outdoors.
Press DISP./.,',:\ repeatedly
to
display
the histogram
• Set the exposure so that the graph is concentrated
on
the outer edges and the graph is
balanced on both sides.
How to
read
the histogram
CD
If the peak fills too much
of
the frame. the image will appear
mostly black.
@ If the peak fills too much of the frame, the image will appear
mostly white.
@ The part indicated
in
green
in
the histogram shows the luminance
distribution
in
the center area
of
the monitor.
~
"DISP.l./'~
button Changing the information
on
display/Display the menu guidelTurning
on the LED illuminator/Checking the time" (P. 19)
IThe red-eye cannot be fixed
/ • Depending
on
the picture, the red-eye may not be fixed. Also, parts except the eye may be
'."'.V
.•
_ fixed.
Bright
specks appear in the picture
• Light reflecting from dust and other particles
in
the air at night may appear as bright specks
in
pictures taken using the flash.
56
EN
To Next Page
Loading...
