82
Adjusting the White balance
5
Advanced shooting
3
Press .
• If you selected AUTO, press again to exit the menu.
• If you selected PRESET, the screen for choosing a preset white
balance is displayed.
4
Press to select , ,
or , then press .
• The menu goes off.
5
Take the picture.
• White balance may not be effective under some special light
sources.
• After setting a white balance mode other than AUTO, play back the
picture and check the colors on the monitor.
• When the flash is fired with a white balance setting other than
AUTO, colors may appear different in the resulting picture from the
colors you see on the monitor.
PRESEt WB
CANCEL
GO
SELECt
Note
To Next Page
Loading...
