VIDEO OUT
Playing
back
pictures
on
a
TV
NTSC / PAL
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV's video
signal type.
•
TV
video signal types by country/region. Check the video signal type before connecting the
camera to the TV.
NTSC : North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing
back
pictures
on
a TV
Turn
off
the camera and the
TV
before connecting.
Connector cover
Multi-connector
---~:+--+-i-7~~
Connect to the TV's video input
(yellow) and audio input (white)
terminals.
Settings
on
the
camera
Press
POWER
in
playback mode to turn the
camera on.
• The last picture taken is displayed on the
TV. Use the arrow pad to select the
picture you want to display.
AV
cable (provided)
Settings
on
the
TV
Turn the TV on, and set it to video input
mode.
• For details
of
switching to video input,
refer to your TV's instruction manual.
• Images and the information displayed on
the screen may become cropped
depending on the TV's settings.
~
CD
::J
C
o
\J
CD
.,
Q)
.....
o
::J
U>
POWER SAVE.....................................
Setting
the
camera
to
the
power
save
mode
OFF / ON
When no operation has been performed for approximately 10 seconds while
in
shooting
mode, the monitor automatically shuts off. Pressing the zoom button
or
other buttons
restores the camera from power save mode.
To Next Page
Loading...
