,~_.-
...
.,
..
~----------,_
..
_
..
__
..
_-_._-----
Using a new card
• If you use a non-Olympus card or a card that was used on a
computer
for another
application, use the [FORMAT] function to format the card.
~
"MEMORY
FORMAT
(FORMAT)
Formatting the internal
memory
or card" (P.34)
IThe card access lamp blinks
• An image
or
movie is being recorded
or
downloaded (when connected to a computer).
•
Do
not
do
any
of
the following while the card access
lamp
is blinking. Doing so may
prevent the image data from being saved and render the internal memory
or
card
unusable.
•
Open
the battery/card compartment cover.
•
Remove
the battery and card.
Extending the useful life of the battery
• Performing
any
of
the following operations
when
not actually taking pictures can deplete
the battery power.
• Repeatedly pressing
the
shutter button halfway.
• Repeatedly using the zoom.
• To minimize the battery consumption, set
[POWER
SAVE] to [ON] and turn
off
the camera
whenever
it is not
in
use.
~
"POWER
SAVE Setting the camera to the
power
save mode" (P.39)
Functions that cannot be selected from menus I Function that cannot be
selected even by pressing the function buttons
Some
items are not selectable from the
menus
when
using the arrow pad (The menu
items displayed in
gray
cannot be selected).
• Items that cannot be set with the current shooting mode
• Items that cannot be set because
of
an item that has already been set:
When
[DRIVE] is set to
[~],
[FINE
ZOOM]
or
[DIGITAL
ZOOM]
cannot
be set.
Depending on the situations,
some
items cannot be set
when
the button is pressed.
[s!-],
Flash Mode, etc.
Some
functions
cannot
be used when there is
no
card in the camera.
[PANORAMA], [PRINT ORDER], [FORMAT], [BACKUP]
Restoring default settings
• This camera retains the settings (except for
SCN)
even after the
power
is turned off.
To
return the settings to default settings, execute [RESET].
~
"RESET
Restoring default settings" (P.23)
-
o
7'
::::J
o
:E
'<
o
c
~
()
Q)
3
ct>
...,
Q)
0-
ct>
~
ct>
~
EN55
To Next Page
Loading...
