Selecting white balance according to surrounding lighting 0
31
1
Taking Pictures
Press or to select [AUTO], [5],
[3], [1] or [>], then press the OK/
MENU button.
The selected white balance mode is set.
When the white balance mode is selected,
the white balance indicators [5, 3, 1,
>] are displayed on the monitor.
When [AUTO] white balance mode is set,
no indicator is displayed.
Set the white balance to [5] or [3] to
capture a sunrise or sunset with beautiful reddish tones.
The white balance feature may not be effective under some special light
sources, such situations where multiple lights are used.
If you set a white balance mode other than [AUTO], play back the picture
and check the colors on the monitor.
When the flash is fired with a white balance setting other than [AUTO],
colors may appear different in the resulting picture from those in the picture
you see on the monitor.
WB
GO
AUTO
SELECT
>
WB
GO
SELECT
-1.0
To Next Page
Loading...
