Recording sound with still pictures R
48
1
Taking Pictures
Press or to select [ON] and
press the OK/MENU button.
Recording sound with still pictures is set.
Press the OK/MENU button again to exit the
menu.
Press the shutter button to start the
sound recording. When the sound
recording is started, position the
microphone toward the sound source.
The volume of the recorded sound can be
adjusted during playback. g“Setting
volume” (P.96)
If the source of the sound you are recording
is more than 1 m (3.3 ft.) away from the microphone, the recorded sound
may not be very clear.
The next picture cannot be taken until sound recording has stopped.
Sound cannot be recorded during successive shooting (P.40), panoramic
shooting (P.42) or composite 2 pictures shooting mode (P.45).
OFF
ON
R
PANORAMA
2 IN 1
CARD
SET
CAMERA
Microphone
BUSY
To Next Page
Loading...
