Replacing the battery
Replace the battery if there is no sound
when the button is pressed.
Open the buckle and remove the
battery cover inside by sliding in the
direction of the arrow.
Insert a new battery (CR1220) with the
plus (+) mark showing on top .
Attach the battery cover by sliding in
the direction of the arrow and close
the buckle .
1.
2.
3.
Handling Cautions
Never apply excessive force to the remote control
when attached to the strap.
• Usable temperature range: -10°C~40°C.
(14°F~104°F)
44
To Next Page
Loading...
