The data has not been printed (or looks faded).
The data mode was set no data (—).
Change the data mode to another setting,
(p. 45)
There is a bright color like white, orange, or yellow
in the area of the picture where the data is printed.
Avoid bright colors in the lower right corner of
your photo compositions. (p. 47)
The picture was taken with black-and-white film.
Do not use black-and-white film if you want to
print data on the pictures.
The camera's battery is low.
Replace with a new battery. (p. 13)
The color of a picture taken indoors is abnormal.
The color of the room lighting affected the picture.
Set the flash to Fill-In mode.
63
To Next Page
Loading...
