APERTURE-PREFERRED
AUTO
The background blur can be controlled by adjusting the aperture
setting. The shutter speed will be selected automatically.
Press
the
F.No.
button
to
enter the Aperture-
Preferred Auto mode.
Notes: Additional pressing of the F.No. button stops
down the aperture. Once the camera has passed the
smallest available aperture setting, it will return to the
largest available aperture setting. Blinking in the
viewfinder indicates the subject is under- or overexposed.
Change the aperture setting until it stops blinking.
Larger aperture (smaller value) for a
blurred background
Smaller aperture (larger value) for a
sharper background
F.No.
35
To Next Page
Loading...
