Olympus T-10 - Adjusting the Brightness; Exposure Compensation

30
EN
Using the self-timer
After the shutter button is pressed all the way down, the
picture is taken after a short delay.
1
Select the self-timer option in the shooting
function menu.
44
PP
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
10 M
1212 22
Y
OFF
Y
OFF
2
Use HI to select the setting option, and
press the H button to set.
Option Description
Y OFF
The self-timer is deactivated.
Y 12 SEC
The self-timer lamp turns on for
approx. 10 seconds, then blinks for
approx. 2 seconds, and then the
picture is taken.
Y 2 SEC
The self-timer lamp blinks for approx.
2 seconds, and then the picture is
taken.
Self-timer shooting is automatically canceled after
one shot.
To cancel the self-timer after it starts
To cancel the self-timer after it starts
Press the m button.
Adjusting the brightness
(Exposure compensation)
The standard brightness (appropriate exposure) set by
the camera based on the shooting mode (except for
[iAUTO]) can be adjusted brighter or darker to obtain a
desired shot.
1
Select the exposure compensation option in
the shooting function menu.
0.0
EXPOSURE COMP.
0.30.30.00.00.30.3
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
10 M
PP
##
2
Use HI to select the desired brightness,
and press the H button.