Olympus TG-3 - ISO Sensitivity; O; y

38 EN
ISO sensitivity Sets the ISO sensitivity.
l
ISO Auto
The camera automatically sets the sensitivity with
priority on image quality.
m
High ISO
Auto
The camera automatically sets the sensitivity with
priority on minimizing blur caused by a moving subject
or by camera shake.
Q
to # Value
Set a smaller value to reduce noise in the picture, or a
larger value to reduce blur.
o/Y
Sets the sequential shooting function and the time
from pressing the shutter button until the picture
is taken.
o
Single
One frame is shot each time the shutter button is
pressed.
j
Sequential
The images are taken sequentially for 100 frames at up
to about 5 frames per second (fps) while pressing down
the shutter button all the way down.
c
High-Speed1
The images are taken sequentially for up to 100 frames
at about 15 frames per second (fps) while pressing
down the shutter button all the way down.
d
High-Speed2
The images are taken sequentially for up to 100 frames
at about 60 frames per second (fps) while pressing
down the shutter button all the way down.
Y12
Y
12 sec
The self-timer lamp turns on for approx. 10 seconds,
then blinks for approx. 2 seconds, and then the picture
is taken.
Y2
Y
2 sec
The self-timer lamp blinks for approx. 2 seconds, then
the picture is taken.
YC
Custom
Self-timer
Photographs are taken at “the number of frames, the
time from pressing the shutter button until the picture is
taken, and the interval time” which you set.