70
EN
Using GPS function (GPS Settings)
1
Select [GPS Settings] in the d Settings Menu 3 (P. 41) and press
A.
2
Select [GPS] and press A.
3
Select [On] and press A.
• G flashes during measurement. When
the position measurement ends, G will
appear and the position information will be
displayed.
• Once the position measurement has ended,
position information will be added to the
pictures at the time of shooting.
PP
0:340:34
44
N
ORM
GPS
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
4:3
16
M
i
• Do not cover the GPS antenna with your hands or metal objects.
• If you are using the GPS function for the first time and the A-GPS has not
been updated, or if the function has not been used for a long time, it may take
a few minutes for the position measurement to end.
• Latitude and longitude are displayed on the shooting screen. If you do not
wish to add position information, set [GPS] to [Off].
• Position information is not added to movies.
• When the [GPS] is set to [On], the battery will run down faster.
To Next Page
Loading...
