Olympus TG-3 - Page 79

79 EN
 Reserving one print each of all images on the card [U]
1
Follow Steps 1 and 2 in [<] (P. 78).
2
Use FG to select [U], and press the A button.
3
Follow Steps 5 and 6 in [<].
 Resetting all print reservation data
1
Follow Steps 1 and 2 in [<] (P. 78).
2
Select either [<] or [U], and press the A button.
3
Use FG to select [Reset], and press the A button.
 Resetting the print reservation data for selected images
1
Follow Steps 1 and 2 in [<] (P. 78).
2
Use FG to select [<], and press the A button.
3
Use FG to select [Keep] and press the A button.
4
Use HI to select the image with the print reservation you
want to cancel. Use FG to set the print quantity to “0”.
5
If necessary, repeat Step 4, and then press the A button when
finished.
6
Use FG to select the [X] (date print) screen option, and
press the A button.
• The settings are applied to the remaining images with the print
reservation data.
7
Use FG to select [Set], and press the A button.