Olympus TG-3 - Page 95

95 EN
Using separately sold accessories
Taking pictures with the Olympus Wireless RC Flash
System
You can take pictures with a wireless flash when using a flash compatible
with the Olympus Wireless RC Flash System. The camera’s built-in flash is
used for communication between the camera and flash.
• For details about operation of a wireless flash, refer to the instruction manual
for the special external flash.
1
Set the wireless flash based on the guidelines below.
Wireless flash setup range guidelines
• The setup range varies depending on the ambient environment.
7m
30°
30°
5m
50°
50°
50°
50°
30°
30°
Flash direction
Point the remote
sensor toward the
camera
2
Turn on the wireless flash.
3
Use the MODE button on the wireless flash to set to RC mode,
and make the channel and group settings. (Channel: CH1,
Group: A)
4
Set [Remote Flash] (P. 45) on the camera to [#RC].
5
Select the flash option in the function menu, and then select
the remote control.
• “Flash” (P. 31)