Olympus u 700 - Adjust Monitor Brightness; Set Date and Time; Dual Time Settings

36
Menu operations
2
The date and time is saved with each image, and is used in the file name.
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• For a more accurate setting, press o when the time signal hits 00 seconds.
• The date format is the same as that set with [X].
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• For a more accurate setting, press o when the time signal hits 00 seconds.
s......................................................................Adjusting the monitor brightness
X....................................................................................Setting the date and time
DUALTIME.................................Setting the date and time in another time zone
OFF Switches to the date and time set in [X].
ON Switches to the date and time set in [DUALTIME]. When setting the
dual time, select [ON], and then set the time.
OK
SET
MENU
BACK
s ŜŊŏŞ
1: Brightens the monitor. 2: Darkens the monitor.
Press o after setting is complete.
OK
SET
MOVE
X
ŜŊŏŞ
x
x
ijııķġįġıIJġįġıIJ
ijııķġįġıIJġįġıIJ
Y ȁ M ȁ D
ııġĻġıı
ııġĻġıı
12 : Sets the date and time.
43 : Moves to the previous or next setting.
12
: Select the date format (Y-M-D, M-D-Y, D-M-Y).
OK
SET
MOVE
DUALTIME ŜŊŏŞ
ijııķġįġıIJġįġıIJ
ijııķġįġıIJġįġıIJ
ııġĻġıı
ııġĻġıı
43 : Moves to the previous or next setting.
12 : Sets the date and time.