OLYMPUS Master 2
System requirements and
installation of OLYMPUS
Master 2 ............................
Instal{ the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting the camera to a
computer
m Make sure the camera is turned off,
• The monitor isoff.
2 Connect the camera to a computer.
• The camera automatically turns on.
Multi-connector
U
_ You can charge the battery by selecting
and pressing the @ button.[EXIT]
_F'_ The [USB] screen above does not appear
and charging may automatically start in
cases where there is an insufficient charge
or the camera is connected to a computer
via a USB hub.
Locate the position of the USB port by
referring to your computer's instructions
manual.
3 Use _ to select [PC], and press
the @ button.
®Thecomputerautomaticallydetectsthecameraas
a newdeviceonthefirst connection.
Windows
After the computer detects the camera, a
message indicating the completion of the
setting appears. Confirm the message and
click "OK". The camera is recognized as a
removable disk.
Macintosh
When iPhoto started, exit iPhoto and start
OLYMPUS Master 2.
_ While the camera is connected to the
computer, shooting functions are disabled.
_ Connecting the camera to a computer via a
USB hub may cause unstable operation.
When [MTP] is set for the submenu that
appears by pressing _ after selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
.........Sta_ting OLYMPUS Master 2
Double=click the OLYMPUS Master 2
icon.
Windows
app...... thedeektop.
Macintosh
"_ appears in the OLYMPUS Master 2 folder.
• Browse window appears after starting the
software.
_,_) When you start OLYMPUS Master 2 for the
first time after installation, "Default Settings"
and "Registration" screens appear. Follow
the instructions on the screen.
To Next Page
Loading...
