30 EN
Printing pictures
5 Disconnect the USB cable from the
printer.
1 Display the screen indicated on the right
according to procedure 1 and 2 on P.28,
and press i.
2 Select [CUSTOM PRINT], and press i.
3 Make the print settings according to the operation guide.
You can use [EASY PRINT] even when the camera is turned off or in shooting mode.
With the camera turned off or in shooting mode, connect the USB cable. The
selection screen for the USB connection is displayed. Select [EASY PRINT].
g“EASY PRINT.” (P.29), “CUSTOM PRINT” step 2. (P.30)
Other print modes and print settings (CUSTOM PRINT)
OK
<
EASY PRINT START
PC
/
CUSTOM PRINT
USB
PC
OK
EASY PRINT
CUSTOM PRINT
EXIT
SET
USB connector
Operation guide
To Next Page
Loading...
