To Next PageTo Next Page
Need help?Do you have a question about the OLYS B2B1230 and is the answer not in the manual?
General| Brand | OLYS |
|---|---|
| Model | B2B1230 |
| Category | Battery Charger |
| Language | English |
Details models for 12V input to 12V output charging.
Details models for 12V input to 24V output charging.
Details models for 24V input to 24V output charging.
Details models for 24V input to 12V output charging.
Charging the main battery via alternator and starter battery when the vehicle is running or not.
Maximizing solar panel efficiency and charging the main battery using MPP technology.
Covers automatic charging, multiple protection features, and the use of an external temperature sensor.
Recommendations for battery installation, charging, and maintenance for optimal life and efficiency.
Wiring diagram for connecting the B2B series charger to vehicle systems and batteries.
Wiring diagram for connecting the BS series charger with solar panels and vehicle systems.
Wiring diagram for specific BS series models, including solar panel connections.
Wiring diagram for specific B2B series models, showing alternator and battery connections.
Details the pluggable 6-pin terminal set for wire connection and re-insertion.
Connection for the main battery temperature sensor, including compensation values.
Used for accurate battery voltage measurement to determine current and compensate for voltage loss.
Controls starter battery and relays for high-current applications like car air conditioners.
B2B charging control signal, connects to alternator's D+ signal or ignition switch.
Connects the temperature sensor to the 'T T' port to measure real-time battery temperature.
DIP switch 1 controls whether lithium batteries charge below 0°C.
DIP switches 2, 3, 4 select the battery type (GEL, Sealed, Flooded/AGM, LiFePO4, Lithium-ion).
Critical warnings about selecting the correct battery type and ensuring lithium batteries have BMS.
Table detailing charging parameters (Equalizing, Boost, Float, HVD, LVD) for different battery types.
Notes clarify data determination and scaling for 24V systems.
Details the status of LEDs (L1-L5) indicating charging stages and errors.
Remarks specify parameter values for 24V batteries.
Charging with maximum current until the battery reaches the boost voltage.
Charging at constant voltage as current drops, with a 2-hour duration.
Maintaining float voltage with a low current.
Visual representation of the battery charging stages and voltage/current curves.
Over-voltage and low-voltage protection for the main battery.
Low-voltage protection for the starter battery.
Protection against excessive power from solar panels or B2B charging.
Protection against reverse polarity for battery, solar, and start connections.
Protection against overheating and system voltage errors with buzzer alarms.
Nominal voltage, capacity, and voltage range for main batteries.
Nominal voltage and recommended capacity for starter batteries.
Voltage range, max charge power, current, and D+ signal specs for B2B charging.
PV power, current, voltage, and charging current specs for BS series.
Temperature compensation values and TR signal details.
Stand-by current, weight, operating temperature, and dimensions.
List of available optional accessories like meters and sensors.
