Need help?Do you have a question about the Omega Engineering HH147 and is the answer not in the manual?
General| Type | Digital Thermometer |
|---|---|
| Display | LCD |
| Power Supply | 9V battery |
| Resolution | 0.1°C/°F |
| Thermocouple Type | Type K |
| Weight | 220 g (7.8 oz) |
Controls the power state of the thermometer, turning it on or off.
Allows sequential alternation between Celsius, Fahrenheit, and Kelvin temperature units.
Freezes the current displayed temperature reading and displays a HOLD icon.
Allows selection from seven different thermocouple types for accurate measurement.
Configures high and low temperature alarm thresholds.
Sets specific high and low temperature values that trigger alarms.
Enables data transfer via RS-232, disabling auto power off.
Records temperature data in real-time, with a maximum of 10000 records.
Defines communication codes and data transfer modes between devices.
Guides through the manual installation process of the RS-232 software.
Details the steps to start the software in Mode 0 for online operation.
Explains sensor key availability and screen display for Mode 0.
Displays real-time temperature curves with adjustments for display.
Configures communication ports (COM1-COM4) for online connection with the equipment.
Specifies the COM port for establishing an online connection with the device.
To Next Page
