How to fix battery mode operating on Omega UPS?
If your Omega UPS is operating in battery mode, you should check the AC utility power source and the fuse on the rear panel of the UPS. This may resolve the issue and restore normal operation.
What to do if my Omega UPS shows a full load condition?
If your Omega UPS indicates a full or overload condition, unplug the least critical equipment connected to the UPS. This should reduce the load and allow the UPS to function correctly.
What to do if my Omega UPS shows an overload condition?
If your Omega UPS indicates an overload condition, unplug the least critical equipment connected to it. This action should decrease the load and enable the UPS to operate as expected.
General| Speed | 80 RPM |
|---|---|
| Juicing Efficiency | High |
| Warranty | 15-year warranty |
| Motor Power | 150 Watts |
| Speed Settings | 1 |
| Material | Ultem |
To Next Page
