Need help?Do you have a question about the Omega Excalibur AL-1000-E and is the answer not in the manual?
Details the functions of the Arm/Lock, Disarm/Unlock, II, and III buttons on the Excalibur transmitter.
Explains the operation of the remote transmitter and its upgrade options like the Omega Echo.
Describes the function of the Status Light as a system indicator and visual deterrent against theft.
Details the uses of the Valet Switch for Valet Mode, Emergency Override, and programming.
Details the procedure for arming the system using the transmitter's lock/arm button.
Explains the programmable feature that automatically arms the system upon exiting the vehicle.
Describes how the system bypasses inoperable circuits during arming and its indications.
Explains how to temporarily deactivate the impact sensor during arming.
Details the system's response to intrusion attempts, including siren and light activation.
Explains the feature of automatic door relocking when the system is triggered.
Outlines the procedure for disarming the system using the transmitter's disarm/unlock button.
Describes the alternative method of disarming using the Valet Switch and ignition key.
Explains the Safety Disarm mode, which disarms the system without unlocking doors.
Details the programmable feature that prevents inadvertent system disarming.
How to activate the panic feature by pressing transmitter buttons for 3 seconds.
Explains how to disengage the remote panic feature by button press or timeout.
Discusses flexible panic operation and moving the 3rd channel output to the III button.
Details how to enter and exit Valet Mode and its effects on system functions.
Explains the Emergency Override procedure using the Valet Switch and ignition key.
Describes how to customize the Emergency Override using multiple Valet Switch presses.
Explains the meaning of different Status Light states: Off, On, Flashing Slow, Flashing Fast.
Describes how the Status Light indicates specific zones that triggered an alarm.
Explains how the Status Light shows the number of authorized transmitters.
Details various audible and visual cues like siren chirps and light flashes for system events.
Provides a comprehensive list of audible and visual indications for system events.
Explains how to temporarily bypass the auxiliary shock sensor using the transmitter.
Describes the operation and uses of the 2nd channel (trunk release) and 3rd channel outputs.
Details the procedure and timeframe for cancelling activated Anti-Carjacking protection.
Explains the system's response if Anti-Carjacking is not cancelled, leading to an alarm.
Details three types of Anti-Carjacking protection: ignition, door, and transmitter activated.
Explains Excalibur's Code Jumping feature to prevent signal interception and code grabbing.
Explains how the system verifies and displays the number of authorized transmitters.
Explains the alert system for newly programmed transmitters and its duration.
Step-by-step guide for programming new transmitters to operate the Excalibur system.
Instructions for entering the system's programming mode using the ignition and Valet Switch.
Explains how to select a specific feature number for programming using the Valet Switch.
Details how to turn features ON or OFF using the transmitter buttons.
Explains how to program subsequent features sequentially after selecting them.
Details the SecureCode feature for customizing Emergency Override security.
Enables or disables the automatic arming feature when exiting the vehicle.
Prevents the system from being accidentally disarmed.
Automatically engages the starter interrupt after a set delay.
Automatically locks doors when the ignition key is turned on.
Automatically unlocks doors when the ignition key is turned off.
Removes system arming and disarming confirmation chirps.
Adds confirmation siren chirps for lock/unlock operations in Valet Mode.
Sets the duration of the alarm sounding and light flashing after activation.
Controls parking light behavior upon system disarming for illumination.
Configures the system to disarm when the 2nd channel (trunk release) is used.
Sets the delay period after arming before system activation can occur.
Allows using the vehicle's horn as the audible output instead of the electronic siren.
Allows selection of four different volume levels for system confirmation chirps.
Initiates Anti-Carjacking protection when the vehicle's ignition is turned on.
Initiates Anti-Carjacking protection when a vehicle door is opened.
Initiates Anti-Carjacking protection via a signal from the transmitter.
Assigns the III button to operate Panic or the 3rd channel output.
Details the initial step of turning off ignition and pressing the Valet Switch 5 times.
Explains how to select a specific feature number for programming using the Valet Switch.
Details how to turn features ON or OFF using the transmitter buttons.
Introduces the Echo transceiver as a 2-way upgrade, detailing its buttons and functions.
Explains the system status icons displayed on the Echo remote transceiver's LCD screen.
Details the meaning of various icons on the Echo remote, including status, battery, and alerts.
Provides further explanations of icons like DOOR, START, CARJACK, and general operational notes.
Covers system signal transmission, multiple transceiver use, and system responsiveness.
Lists programmable features for the Echo: Chirp/Mute, Vehicle Type, Time, Melodies.
Explains the sequential steps for programming the Echo transceiver's features.
Details steps for setting vehicle type, adjusting clock time, and selecting start/stop melodies.
Explains how to exit Echo programming mode by inactivity or button presses.
To Next Page
General
