EasyManua.ls Logo

Omega Echo-2 User Manual

Omega Echo-2
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
12/03 MO/I_Echo-2
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are
warranted to be free from defects in materials and workmanship under normal use. If a product sold by the
Company proves to be defective, the Company will repair or replace it free of charge within the first year and
thereafter all parts to be repaired will be free with only a nominal charge for Omega Research and Development,
Inc.'s labor and return shipping, to the original owner during the lifetime of the car in which it was originally
installed.
All products for warranty repair must be sent postage prepaid to Omega Research & Development, Inc.,
P.O. Box 508, Douglasville, Georgia 30133, with bill of sale or other dated proof of purchase. This warranty is
nontransferable and does not apply to any product damaged by accident, physical or electrical misuse or abuse,
improper installation, alteration, any use contrary to its intended function, unauthorized service, fire, flood,
lightning, or other acts of God.
This warranty limits the Company's liability to the repair or replacement of the product. The Company shall
not be responsible for removal and/or reinstallation charges, damage to or theft of the vehicle or its contents, or
any incidental or consequential damages caused by any failure or alleged failure of the product to function
properly. Under No Circumstances Should This Warranty, Or The Product Covered By It, Be Construed As A
Guarantee Or Insurance Policy Against Loss. The Company neither assumes nor authorizes any person or
organization to make any Warranties or assume any liability in connection with the sale, installation, or use of
this product.
L I M I T E D L I F E T I M E W A R R A N T Y
This device complies with FCC Rules part 15. Operation is subject to the following two conditions, (1) This
device may not cause harmful interference and, (2) This device must accept any interference that may be
received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user's authority to operate the equipment.
COPYRIGHT 2002: OMEGA RESEARCH & DEVELOPMENT, INC.
Omega
Echo-2
OPERATION GUIDE &
INSTALLATION MANUAL
2-Way Controller Transceiver

Other manuals for Omega Echo-2

Question and Answer IconNeed help?

Do you have a question about the Omega Echo-2 and is the answer not in the manual?

Omega Echo-2 Specifications

General IconGeneral
System Type2-Way
Remote StartYes
Keyless EntryYes
RangeUp to 3000 feet
Engine ImmobilizerYes
LED IndicatorYes
Shock SensorYes

Summary

Limited Lifetime Warranty

Installing the Echo Transceiver System

Installation Step 1: Locate and Remove Jumper

Locate and remove the security system's Echo port jumper connector.

Installation Step 2: Connect and Mount Unit

Plug in the unit and mount the receiver/transmitter onto an interior glass.

Installation Step 3: Program Transceivers

Program the Echo transceiver and original 1-way transmitters into the security system.

Programming the Echo Transceiver

Procedure: Program Echo to Security System

Step-by-step guide to program the Echo transceiver into the security system.

About the Echo Transceiver System

Overview of the Omega Echo system as a modular 2-way remote controller.

Echo Transceiver Button Functions

Details the functions of the four operational buttons on the Echo transceiver.

Echo Transceiver Features and Display

The 5th Button Functionality

Describes the "Programming" button's use for customizing features and screen illumination.

Echo Remote Transceiver Icons Overview

Explains various icons displayed on the LCD screen indicating system status.

Important Operational Notes

Provides crucial information regarding system communication and response times.

Melody Selection and Icon Details

Start and Stop Melody Programming

Guide to selecting and programming musical melodies for remote starting.

Detailed Icon and Feature Explanations

Explains icons for battery status, mute, channel outputs, and vehicle security events.

Advanced Transceiver Programming

Transmitting Tower Icon and Vehicle Type Selection

Explains the in-range indicator icon and how to customize vehicle type display.

User-Programmable Feature Overview

Lists programmable features like Chirp/Mute, Vehicle Type, Time, and Melodies.

Time Adjust Programming Procedure

Step-by-step instructions for setting the Echo transceiver's clock time.

Related product manuals