EasyManua.ls Logo

Omega 2503.80.00 - Self-winding chronograph

Omega 2503.80.00
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 23
English
Manual-winding chronograph
Operating instructions2
Pusher B: reset (after a stop).
Note: resetting/zeroing of the sub dials must only be carried out after
the chronograph has stopped. Never push the chronograph’s two
pushers (A and B) simultaneously (calibres 3200, 3201).
Calibre 1866 – date and moon phase correction
Correcting the date (small counter at 12 o'clock): press
corrector (C).
Correcting the moon phase: press corrector (D) to move the disc
into the full-moon position. Then determine how many days have
elapsed since the last full moon (consult a calendar) and press the
corrector the equivalent number of times.
When the watch is running, the date and moon phase move forward
automatically.
Important: avoid pressing correctors (C) and (D) (date and moon
phase) if the watch is displaying any time between 7 and 12 o'clock
(am or pm).
Do not set the date by moving the hour hand past midnight, since
this may desynchronise the date and moon phase indicators.
Í
Self-winding chronograph
Operating instructions2
CALIBRES 3202, 3205 (fig. XV)
CALIBRE 3602 (fig. XIII or XIII
bis
)
The crown has 2 positions:
Watch functions:
1. Normal position (wearing position): when the crown is posi-
tioned against the case, the crown ensures that the watch is water-
resistant.
Occasional winding: if the watch has not been worn for 45 hours
or more, wind it up with the crown in position 1.
2. Time setting: hours – minutes – seconds. Pull the crown out to
position 2. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1/8th of a second for up to:
– 14 minutes for diving function (calibre 3601)
– 12 hours for regatta function (calibre 3602)
Pusher B: reset (after a stop).
Note: never push the chronograph’s two pushers (A and B) simulta-
neously (calibres 3202, 3205).
Regatta function (calibre 3602)
Based on a 10-minute start period, as used in the America’s Cup.
In addition to the counters for seconds, minutes and hours, this
movement has an indicator that displays the countdown to a regatta
start.
CALIBRES 3220, 3601 (fig. XIII)
OMEGA_V12-I.indb Abs1:22-Abs1:23OMEGA_V12-I.indb Abs1:22-Abs1:23 28/12/09 18:30:3028/12/09 18:30:30

Related product manuals