Figure 1. IEC symbols
1.3 General Description
The Model BB703 is a portable, rugged, bench-top, hot blackbody calibration
source with a built-in precision PID digital controller. The calibrator is used to
test and calibrate infrared pyrometers. The 28.6mm (1.125") diameter target plate
has an emissivity of .95 and can be set to any temperature between ambient +11
to 400°C (ambient +20 to 752°F).
BB703 Introduction
1
1-2
Caution, refer to accompanying documents
Caution, hot surface
230 Vac @50/60Hz (European Models)
115 Vac @50/60Hz (Domestic Models)
To Next Page
Loading...
