DIRECTIONS FOR USE
Clean all parts before using juicer.
This product will not start working before all the parts and components
are correctly assembled. Please install and use the product as follows:
1
ALIGN THE JUICE NOZZLE WITH THE JUICE OUTLET
OF THE FILTER BASKET. SET IN PLACE
2 PUT FILTER BASKET HOUSING ON BODY.
3
PUT FILTER BASKET INTO FILTER BASKET HOUSING, AND
CONFIRM IT IS IN THE CORRECT PLACE. (BEFORE USING,
PLEASE CHECK IF ANY DAMAGE TO THE NET. IF ANY,
PLEASE STOP USING AND CALL CUSTOMER SERVICE.)
4
INSTALL THE TOP COVER WITH CHUTE ABOVE MACHINE
BODY, AND INSTALL IT AS NOTED TO THE IMAGE.
5
PLACE THE SAFETY LATCH WITH THE DOUBLE CONCAVE
TROUGH THE TOP COVER WITH CHUTE, PRESS DOWN ON
THE SAFETY LATCHES. THE SOUND OF “CLICK” MEANS
SUCCESSFUL INSTALLATION.
* UNIT WILL NOT WORK IF SAFETY LATCHES ARE NOT IN
PLACE PROPERLY
7
To Next Page
Loading...
Need help?
General
