Command Description
LOCAL Returns user to manual operation of the calibrator
LOCKOUT Locks out the keypad of the calibrator, and allows for
remote operation only
LOWER_MEAS Sets the mode for measuring on the lower display.
L_PRES_UNIT Sets the pressure unit on the lower display
OUT Sets the output of the calibrator
OUT? Returns the output of the calibrator
PRES? Returns the model and serial number of the attached
pressure module
PRES_UNIT? Returns the pressure unit for the upper and lower dis-
play
PULSE_CNT Sets the number of pulses for the pulse train
PULSE_CNT? Returns the number of pulses in the pulse train
REMOTE Puts the calibrator in remote mode
RTD_TYPE Sets the RTD type
RTD_TYPE? Returns the RTD type
RTD_WIRE Sets the number of wires used by the RTD mode.
RTD_WIRE? Returns the wire number setting used in the RTD mode
SET_CLOCK Set calibrator clock
SIM Sets the output for mA simulation
SIM? Returns the output of the mA simulation
TAG_CLEAR Clear test data for a specified tag
TAG_CLEAR_ALL Clear test data for all tags
TAG_DNLD Download tag calibration test configuration data from a
PC to the calibrator
TAG_UPLD Upload tag calibration test results to a PC from the cali-
brator
TAGS? Upload a list of all tag iD's to PC
TC_TYPE Sets the thermocouple type
TC_TYPE? Returns the thermocouple type
TEMP_UNIT Sets input/output temperature unit for RTD and TC
TEMP_UNIT? Returns the temperature unit for RTD and TC
TRIG Starts and stops the pulse train in pulse mode
TRIG? Returns TRIGGERED when a pulse train is on. Returns
UNTRIGGERED when the pulse train is off.
TSENS_TYPE Sets temperature sensor type.
TSENS_TYPE? Returns temperature sensor type
37
To Next Page
Loading...
