EasyManua.ls Logo

Omega De Ville - Manual

Omega De Ville
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1 / 2
DE VILLE
CHRONOSCOPE CO-AXIAL RATTRAPANTE
Steel on leather strap
Caliber
3612
4847.50.31
V
Co-Axial escapement
l
Automatic
U
Chronometer
:
Rattrapante
o
Sapphire crystal
t
Anti-reflective treatment on both sides
G
3-year International Warranty
T
Water-Resistant to a relative pressure of 10 bar
(100 metres/330 feet)
WATCH FUNCTIONS
The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned against the
case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 55 hours or more, wind it
up with the crown in position 1.
2. Correcting the date: pull the crown out to position 2, turn the crown
backwards, then push the crown back to position 1.
NB: the date cannot be corrected between 9 pm and 12.30 am.
3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with a given time
signal.
CHRONOGRAPH FUNCTIONS
• Pusher A: start – stop, start – stop, etc
Timing to 1/8 of a second for up to 12 hours.
• Pusher B: reset (after a stop).
Note: resetting/zeroing of the sub dials must only be carried out after the
chronograph has stopped. Never push the chronograph’s two pushers (A and B)
simultaneously.

Other manuals for Omega De Ville

Related product manuals