1
Introduction
The DPG4000 combines the high accuracy of digital electronics with
the convenience and ease of use of an analog test gauge. Accurate to
± 0.05% FS, the DPG4000 can be used as a calibration reference, or
in any application where high accuracy pressure measurement is
required.
Many user
gurable functions have been designed into the
DPG4000 including sampling rate, TARE, damping, auto shut , and
min-max. Once the gauge is co gured, settings can be locked and
password protected to prevent unauthorized changes to co guration.
1.1 Customer Service
OMEGA Engineering
Tel: (203) 359-1660
Fax: (203) 359-7811
www.omega.com
email: cservice@omega.com
1.2 Standard Equipment
Check to see that your DPG4000 has arrived intact. Batteries are
factory installed unless you have purchased the optional 24V powered
version, in which case batteries are not supplied or installed. Save the
packing materials at least until you have that there is no
concealed damage.
1.3 Safety information
A Warning identi es conditions and actions that pose hazard(s) to the
user; a Caution identi es conditions and actions that may damage the
Calibrator or the equipment under test.
To Next Page
Loading...
