3.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"1. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
• The water supply tap is
open.
• The
correct amount of detergent
has been added to the
dispenser
.
• The baskets have been
correctly loaded.
• The spray arms are able to
rotate freely
and without
obstruction.
• The dishwasher door is
securely closed
.
LIGHTING
When the
ON/OFF
button
(1)
is pressed, the dishwasher switches on.
The
ON/OFF (2)
and
START/PAUSE (4)
lights will indicate one of the
following states:
Program start
Dishwasher ready to execute a new program.
Program end
Door closed and washing program over.
Alarm
Alarm state (see chapter "
Troubleshooting
").
1935
42 8
1935
42 8
6
7
14
User instructions
To Next Page
Loading...
