Omega Effortless JC2022 - HOW TO USE; Juicing Process and Operation

18
HOW TO USE
1. Open the hopper cover.
• Press the lever of the hopper
cover to open it. Insertion of an
excessive amount of ingredients
may damage the product.
2. Add ingredients only up to
the limit mark of the hopper.
• For soft ingredients, mix them
with other ingredients
for extraction.
3. Close the hopper cover and
keep the juice cap open.
• Before pressing the power
button, place the juice
container and pulp container rst.
• The juice may ow backwards
into the hopper if the juice cap
is closed during extraction. If the
juice does not come out even
after opening the juice cap,
open the hopper cover and
empty out the contents. When
the hopper cover is closed, the
white light is lit.
4. Press the power button briey
to start operation.
• The “click” sound during the
operation of the product is the
sound of the chamber set and
the motor being locked together.
• During operation, the white light blinks on the power button part.
• If the auger stops during operation, the product automatically rotates
in reverse but, if the power is unstable, the reverse rotation may not work.
In such a case, press and hold the power button for over 1 second to
activate the reverse rotation and then press the power button again
briey to activate.
• A timer, which automatically stops after about 5 minutes from the start
of operation, is set. If the power button is controlled during operation or
the hopper cover is opened and then closed, which pauses and then
restarts the machine, the timer is reset to 5 minutes again.