Page 5
• The siren will chirp corresponding
to the currently selected sensitivity
plus one.
• Each time the “Disarm” Button is
pressed it will increase the number of
siren chirps to the corresponding
sensitivity level.
Digital Tilt Sensor (continued)
Within 5 Seconds Press and Release the “Disarm” Button.
The sensitivity scale level is:
Off 1 Siren Chirp
Lowest 2 Siren Chirps
Medium Low 3 Siren Chirps
Medium 4 Siren Chirps
Medium High 5 Siren Chirps
High 6 Siren Chirps
To Exit Digital Tilt Sensor Mode:
Wait 5 Seconds
• The siren will emit a 2 long chirps to
endicate it has exited the sensitivity
adjustment mode.
• The parking lights will flash twice.
(Or the horn will sound if connected)
The LED Status Indicator visually shows the status of the alarm and also provides
a high level of visual deterrence. The LED Status Indicator Light is normally
mounted where it can be seen by others.
Security System Status: The primary function of the LED Status Indicator Light
is to indicate the normal operating status of the security system:
Off = The system is disarmed or in sleep mode and not performing any automatic
functions.
Flashing Slow = The system is fully Armed.
Flashing Fast (while Disarmed) = Automatic Arming is enabled.
The LED Status Indicator
To Next Page
Loading...