Omega OTEC IEWH Series - Display Screen; Indicator Lights & Displays; Display Screen Remarks

-9-
〖Display screen〗
Remarks:
1. Flashing of any indica
tor means the air conditioner runs abnormally, please contact the
distributor in time.
2. Function a: The air conditioner will only display “RUN” indicator to save electricity if it do
not receive any signal from remote controller in 30 seconds. If it receives signal from
remote controller for the second time, the display will still show the corresponding
indicators.
Function b: The indicators on the display screen can be still controlled by “
DISPL
AY
”
button on re
mote controller.
NOTE: Function a or function b is optional, and it is designed already before the
product is dispatched from factory.
“compressor” indicator：This signal light is on when the compressor is running
（
(
o
p
tional
)
）
“
RUN” indicator：This signal light is on when the unit is
in “RUNNING” st
atus.
Wh
en
in Defrosting or Cooling airflow proof ,the indicator is flashing
“TIMER” indicator：This signal light is on when the unit is in Timer.
“Temperature” indicator ：This display can show the set temperature. when
the indicator display F4,F1orF2, means the air conditioner runs abnormally
(TheaboveLEDdisplayisforreferenceonly,subjecttotheactualproduct）