8-2
Data Display Setup Menu
This menu is used to assign display types to screen 01 to 15. The indicates a
display type. The items to set for each type are shown to the right of the display type.
Screen 01
Screen
1-channel digital display
Display type
Display update rate End
2-channel digital display
Display update rate End
Screen 15 4-channel digital display Display update rate End
6-channel digital display (dot model) Display update rate End
1-channel digital display + 1 channel bar graph display
1-channel digital display + 4-channel bar graph display (pen model)
2-channel digital display + 2-channel bar graph display
Display update rate End
Display update rate End
Display update rate End
4-channel bar graph (pen model), 6-channel bar graph (dot model)
End
Flag display On/Off for each channel
End
Channel alarm status display End
Date/Time/Chart speed display End
DI/DO display (when the /R1, or /A option is installed) End
(Display in which different
screens can be assigned
to the top and bottom sections)
Channel No.
Display update rateTop section
Channel No.
Display update rate
EndBottom section
1-channel digital display: tag display
2-channel digital display: tag display
1-channel digital display + 1-channel bar graph display: tag display
1-channel digital display + 4-channel bar graph display: tag display (pen model)
Status display End
System display End
Lights off End
Skip End
Display update rate
End
End
Display update rate
End
Display update rate
End
Display update rate
Multiple display
The display update rate corresponds to “Interval” in the setup menu. It is the time interval at
which the displayed channel is switched.
8.1 Key Operations for Changing the Displayed Information
To Next Page
Loading...