12-21
Specifications
12
12.7 Dimensional Drawings
220 (8.66)
(1.08) 27.5
178 (7.01)
136.5
(5.37)
+2
0
7.5
9.4
2 to 26
Mounting panel
thickness
(Dimensions before attaching
the mounting bracket)
(Dimensions after attaching
the mounting bracket)
Unit: mm (approx. inch)
Unless otherwise specified, tolerance is ±3%
(however, tolerance is ±0.3 mm when below 10 mm).
151.5 (5.96)
144 (5.67)
151.5
(5.96)
144
(5.67)
(0.37)
(0.30)
Note
When mounting the recorder to a panel, use two brackets, top and bottom or left and right.
To Next Page
Loading...
