10-3
Troubleshooting
10
Code Message Explanation/Countermeasures
400 Input username. –
401 Input password. –
402 Select username from ‘admin’ or ‘user’. If the recorder is configured not to use the user name and
password, use user names ‘admin’ or ‘user’.
403 Login incorrect, try again! –
404 No more login at the specified level is acceptable. –
420 Connection has been lost. –
421 The number of simultaneous connection has been –
exceeded.
422 Communication has timed-out. –
Warning Messages
Code Message Explanation/Countermeasures
600 Initialized. Settings and measured data have been initialized.
System Errors
Code Message Explanation/Countermeasures
902 RAM failure. Contact OMEGA.
910 A/D error. Contact OMEGA.
921 A/D calibration value error. Contact OMEGA.
922 A/D calibration is in the wrong order. Contact OMEGA.
930 Memory acquisition failure. Contact OMEGA.
940 The ethernet module is down. Contact OMEGA.
950 A/D number error. Contact OMEGA.
951 EEPROM write error. Contact OMEGA.
960 Ribbon error Contact OMEGA.
961 Printer error Contact OMEGA.
962 Plotter error Contact OMEGA.
963 Pen 1 error Contact OMEGA.
964 Pen 2 error Contact OMEGA.
965 Pen 3 error Contact OMEGA.
966 Pen 4 error Contact OMEGA.
10.1 A List of Error Messages
To Next Page
Loading...