To Next PageTo Next Page
Need help?Do you have a question about the Omega VSHP 060 and is the answer not in the manual?
Explains advisory symbols like Warning, Caution, and Note for safe operation.
Outlines requirements for handling refrigerants, including certification and local laws.
Warnings and guidelines for riser installation, expansion, and stub-out placement.
Detailed steps for inserting and connecting the chassis into the cabinet.
A comprehensive list of checks before energizing the unit for operation.
Step-by-step guide for performing initial start-up in cooling and heating modes.
Details DIP switch functions for thermostat, fan, and system settings.
Guides thermostat cable connections and fan control options (PSC, ECM).
Explains the unit's operational logic for heating, cooling, and compressor calls.
Describes various timers like anti-short cycle, fan-on, and random wait time.
Provides a guide for common issues, solutions, and a diagnostic test mode.
Detailed table of problems, causes, and correction methods for unit operation.
Explains the meaning of various LED codes for status and alarms.
Diagram showing wiring for standard fan mode using a 6-wire harness.
Diagram showing wiring for ECM fans with whisper mode jumper.
Schematic illustrating the electrical connections for a PSC fan motor.
Fields for recording installation details like job name, model, and technician.
Sections for recording operational data (temperatures, flow rates, amps) during start-up.
General