To Next PageTo Next Page
Need help?Do you have a question about the Omega VSHP SERIES and is the answer not in the manual?
Explains the three advisory symbols used to alert readers to potential hazards.
Guidelines for technicians handling refrigerants, emphasizing certification and local laws.
States that modifications void warranties and manufacturer is not responsible for issues.
Illustrates the dimensional drawing for the Silver Series cabinet.
Provides a table of cabinet dimensions for Silver and Gold series units.
Details on blower, motor, nameplates, and refrigerant connections.
Description of Silver and Gold series cabinets and their features.
Information on controls, microprocessor, and thermostat setup.
Information regarding the acoustic and perimeter return air panels.
Procedures for inspecting the unit upon arrival for damage and accuracy.
Guidelines for proper storage of units to prevent damage and contamination.
Procedures for handling and installing shipped loose riser shut-off valves.
Steps and considerations for installing the unit cabinet.
Requirements for servicing the riser loop system for flushing and balancing.
Importance and recommended temperature settings for the riser system loop.
Connecting NPSM fittings for risers and chassis.
Connecting NPT fittings for risers and chassis.
Step-by-step guide for installing the chassis into the cabinet.
Pre-start-up checklist to ensure all installation steps are completed correctly.
Detailed procedure for the initial start-up and testing of the unit.
Configuration options for the microprocessor controller using DIP switches.
Details on thermostat cable, multi-speed, and single-speed thermostat connections.
Methods for controlling fan speed with PSC and ECM motors, including Whisper Mode.
Specifics on using X13 ECM motors for fan control in larger units.
Detailed explanation of how the unit operates during heating and cooling cycles.
How to enable test mode for diagnostic purposes.
Steps for connecting to the unit using a wireless router.
Steps for connecting to the unit directly via a laptop.
Information on selecting, replacing, and inspecting air filters.
Tasks for 30-day, 3-month, and 6-month maintenance intervals.
Annual inspection and maintenance tasks for optimal unit performance.
General