Omega VSHP SERIES - Figure 14: Acoustic Panel Cabinet Base Height Calculation

OMEGA-VSHP.F-IOM-1907
www.omega-heatpump.com 26
Figure 14 Acoustic Panel Cabinet Base Height Diagram
Acoustic Panel Cabinet Base Height Calculation
BH = Baseboard Height + Finish Floor Height*
G = Gap (min 0.5”) between baseboard and panel.
B = Cabinet Base Height
(Min 5", increases in 1" increments)
B = BH + G - 1.5”
Note: *Include flooring thickness, underlayment, and
any concrete leveling as part of calculation.
Example:
If using a 5" baseboard, with 1” Finished Flooring
height, and 0.5" gap:
B = (5” + 1”) + (0.5”) - 1.5”
B = 5"
Therefore a 5” Cabinet Base is required.
G
BH
B
Flooring
Cabinet
Base
Concrete
Slab
Baseboard
Acoustic
Return Air
Panel
1.25"
Example: Baseboard to Base Height Table
Baseboard Height* Cabinet Base Height
Up to 5" 5"
>5" to 6" 6"
>6" to 7" 7"
>7" to 8" 8"
*Includes 1" Total Flooring
*Using gap G= 0.5" (from top of baseboard to
return panel flange)