Omega VSHPe Series - Network Connection Configuration; Controller Interface and Data Log

OMEGA-VSHPe.F-IOM-2205
16
6. With Internet Protocol Version 4 (TCP/IPv4) window
open click on “Use the Following IP Address” and
change the IP address to 192.168.0.99 and Subnet
mask to 255.255.255.0, as shown below. Then click
“OK”.
7. Open up your internet browser (i.e. Explorer, Google
Chrome) and type in the following address
192.168.0.99.
8. The home page will load for the controller software.
Below is a screen shot of the interface (version 5.4 soft-
ware is shown).