Need help?Do you have a question about the Omer Kar 350 and is the answer not in the manual?
General| Brand | Omer |
|---|---|
| Model | Kar 350 |
| Category | Lifting Systems |
| Language | English |
Details about the lift's specifications, including manufacturer and model identification.
Contact information for technical support, service, and customer assistance.
Defines roles such as Operator, Specialized Technician, Exposed Person, User, and Maintenance.
Provides key specifications like lift capacity, motor power, electrical supply, and pressure ratings.
Explains model codes and legends used for identifying different versions of the machine.
Details the maximum lift capacity and safe vehicle placement guidelines to prevent overloading.
Defines the intended function of the lift for motorized vehicles and proper usage scenarios.
Outlines essential safety rules, manual accessibility, and user responsibilities for safe operation.
Lists important precautions including not exceeding capacity, not lifting people, and authorized use.
Illustrates and describes incorrect operational practices to avoid, such as partial loading or using wrong equipment.
Details the components, position, and function of various safety devices like mechanical anti-fall and photocells.
Identifies hazards, responsible personnel, conditions, and associated risks during maintenance activities.
Lists and describes the various identification labels and their meanings for safe operation.
Guidelines for safely transporting and handling the packaged lift equipment using cranes or forklifts.
Requirements for the installation site, including free space, temperature, and foundation characteristics.
Outlines the sequence of operations for connecting the lift's main components and control unit.
Step-by-step instructions for making the hydraulic hose connections to the control unit's hydraulic blocks.
Instructions for connecting the pneumatic hose from the control unit to the lift using a tee coupling.
Requirements for the electrical supply system, including switches, fuses, and cable protection.
Procedure for filling the hydraulic circuit and removing air during the installation phase.
Steps for correctly positioning and fixing the lift's base frames on the floor.
Instructions for checking the gap and spring height as part of the installation process.
Detailed guide for drilling, installing anchor capsules, and tightening anchor rods for secure mounting.
A comprehensive checklist of tests and standards to perform before operating the lift.
Describes static and dynamic load tests with overloading factors for final verification.
Explains the function of various control panel buttons and switches for lift operation.
Recommended schedule and procedures for routine and periodic maintenance operations.
Procedure for calibrating the maximum pressure relief valve, to be done by authorized technicians.
Instructions for aligning and testing photocell sensors for platform synchronization.
Procedure for calibrating the velocity fuse valve, requiring manufacturer specifications.
Steps for leveling the lift platforms without a vehicle present, ensuring proper balance.
Procedure for unblocking safety locks when they are in a blocking position, by authorized technicians.
Steps to remove air from the hydraulic circuit to ensure proper function and performance.
Manual procedure for safely lowering the lift platform in case of a power outage.
Troubleshooting guide for common lift issues, listing problems, locations, and checks.
Details the neon strip lighting system available as an accessory for standalone models.
To Next Page
