Need help?Do you have a question about the OMGA RN 450 FM "U.S" and is the answer not in the manual?
Information about the machine, manufacturer, and usage advice.
Details on product guarantee terms, conditions, and claims process.
Instructions for the proper end-of-life disposal of the machine.
Instructions for normal operation of the radial saw.
Lists operations that are prohibited to ensure safety and proper use.
Overview of the setup and conditions used for noise measurements.
Specific requirements for installing the machine in a safe and suitable area.
The recommended working stance for the operator during machine use.
Details on safety signs and the importance of their presence and legibility.
Explanation of the motor protection device against overloads and power loss.
Details on the electromagnetic brake that stops the motor and blade.
Information on the blade guard, side guards, and anti-kickback rod for safety.
Function of the spring that returns the cutting unit to its idle position.
Specific instructions for connecting the machine to a three-phase power source.
Description of the main control handle and its switch.
How to stop the machine normally and troubleshooting for unforeseen stops.
Essential checks to perform before starting any work cycle.
Instructions for performing transverse cuts on the workpiece.
Guidance on cleaning, sharpening, and caring for cutting tools.
Routine checks to be performed daily to ensure safe and efficient operation.
Maintenance tasks and checks to be performed on a monthly basis.
Maintenance tasks and checks to be performed every six months.
Checking and adjusting the alignment of the blade with the sliding guides.
To Next Page
General
