To Next PageTo Next Page
Need help?Do you have a question about the OMGA OPTIMA 120 and is the answer not in the manual?
Details the machine's warranty coverage and terms.
Defines the materials and operations allowed for the machine.
Lists materials, environments, and operations that are prohibited.
Provides information on the machine's estimated lifespan and disposal procedures.
Critical control for immediate machine shutdown in emergencies.
Main power switch for isolation and safe maintenance.
Interface for connecting a PC to interact with machine programs.
Activates auxiliary machine functions.
Primary control for starting and stopping the machine's motor.
Resets machine alarms and clears indicator lights.
Adjusts air pressure for clamps, ensuring proper operation.
Allows adjustment of blade speed based on material properties.
The main interface for programming and operating the machine.
Component that moves workpieces for cutting.
Optional feature for marking workpieces for cutting or grading.
Essential checks required before starting any work cycle.
Advice on adjusting blade speed according to material size and hardness.
Guidance on normal stops, frequent starts/stops, and securing the machine.
Procedure for performing automatic trim cuts based on programmed sequences.
Instructions for loading workpiece and initiating an automatic cutting process.
Recommendations for the optimal installation location and conditions.
Step-by-step guide on how to safely replace the cutting blade.
Procedures for lubricating key machine components to ensure longevity.
General
