T110 Configuration and Options 2 of 8
Ph# 1-800-663-8806
www.omnexcontrols.com
Application Details
Where on the Machine are you mounting the receiver:__________________________________
________________________________________________________________________________
________________________________________________________________________________
If you are mounting the receiver in an enclosure, what material is the enclosure made of:
________________________________________________________________________________
Typically, how far away from the receiver will the operator be using the transmitter:
_____________Feet
Will the operator have direct line of sight to the receiver:
________________________________________________________________________________
Frequency Band
Select the desired Radio Frequency Band (Check one). If you have unsure which frequency
band to choose please discuss with your sales representative.
902-928MHz Radio Frequencies for North America.
900MHz typically gets 1500 Feet of range line of sight with an internal antenna. External antennas are available to extend this range.
Please discuss options with your sales representative.
2.4-2.483 GHz Radio Frequencies for North, South America, European Union and Asia.
2.4GHz typically gets 900 Feet of range line of sight with an internal antenna. External antennas are available to extend this range.
Please discuss options with your sales representative.
Internal antenna (standard)
External antenna, Indicate Length
6 foot lead
12 foot lead
20 foot lead
Receiver Antenna Options
To Next Page
Loading...