Omnex T110c - Transmitter Time Out; Receiver Cable Options

T110 Configuration and Options 4 of 8
Ph# 1-800-663-8806
www.omnexcontrols.com
Choose one of the receiver wiring options
Receiver Cable Options
None (cable supplied
by customer)
Once turned on; the transmitter will remain on until the Red OFF button is pressed. As a battery
saving feature the transmitter will turn off if there have been no buttons pressed for:
Transmitter Time Out
10 Minutes
1 Hour
4 Hours
No Time Out
(10’) Generic receiver output
cable
Connectors only
Requires special crimper
Custom made output cable. See Output Cable Specification document.