5
Virtuix Omni Operator Manual | Version 2.4| 7/25/2017
Disable SteamVR Home Beta: The SteamVR Home functionality may interfere at times with the
Omni software and Omniverse system. We recommend you uncheck the SteamVR Home Beta
checkbox under SteamVR Settings -> General.
Video: Watch our video on how to best set up the Vive: https://youtu.be/cQKUgjrlWx8.
2.2. Omni Connect Setup
Download Omni Connect: Download and install Omni Connect, and download and read our
Omni Connect Quick Start Guide from www.virtuix.com/download.
Omni Connect Profile: Feel free to create a local profile instead of an Omni Online profile (Omni
Online requires an internet connection and is intended for consumer-use).
Pod Connection: Link the Tracking Pods to their designated PC before use via the included USB
cables to sync them to a designated Omni (they will not work otherwise). In a multi-Omni setup,
mark each Pod with a numbered sticker to indicate to which Omni they are linked, and number
each Omni accordingly.
Pod LED: Yellow vs. Green: To emit a wireless radio signal, the Pod needs to be inserted
properly into the shoe cradle. As long as the Pod is active but not emitting a wireless signal, the
Pod will show a blinking yellow light. Be sure to plug the Pod fittingly into the cradle to activate
To Next Page
Loading...