CARE AND CLEANING
Container:
Rinse the jug after each use with warm water. To prepare your new machine for initial use, follow the steps under Normal
Cleaning. This will clean the unit, and break-in the motor.
Normal Cleaning:
1. Fill one third of the container with warm water and add a couple drops of dish wash liquid.
2. Snap or push the complete 2-part lid into locked position.
3. Select variable speed MIN. Turn machine on and slowly increase speed to MAX.
4. Run the machine on High speed for 30 to 60 seconds.
5. Turn off the machine, and rinse and drain the container.
Deep Clean:
Once a month, or as needed
1. Place 3 cups of cool water and 3 cups of white vinegar into the container (add an extra cup of water and
vinegar for a 2ltr jug).
2. Leave to soak for about four hours.
3. Pour contents out and rinse thoroughly.
4. Follow the appropriate cleaning instructions above.
Lid & Lid Plug:
Separate the lid and lid plug. Wash in warm soapy water. Rinse clean under running water, and dry. Reassemble before
use.
To Next Page
Loading...
Need help?
General
