OmniBlend I User Manual

6
OmniBlend owner. If the Overload Protection kicks in, the machine will stop operating suddenly. Leave the machine to
cool down for 5 to 10 minutes, and then (while the machine is still connected to power), press the Overload Button on the
bottom of the machine. The machine will now work as normal again.
WARNING
To Avoid Injury.
Read and understand instruction manual before using this machine.
READ ALL INSTRUCTIONS AND SAFEGUARDS BEFORE OPERATING BLENDER.
1. Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack
of experience and knowledge. Close supervision is necessary when any appliance is used by or near children or
incapacitated persons.
2. To protect against the risk of electrical shock, do not put the blender base in water or other liquid.
3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
4. Avoid contacting moving parts.

OmniBlend I Specifications

General

Brand	OmniBlend
Model	I
Category	Blender
Language	English